Revised 2025-01-30 This post accompanies the YouTube videos below: Full install, part 1https://youtu.be/cL9l2uAFYck Full install, part 2https://youtu.be/gdVeDLidTnU Minimal install, part1https://youtu.be/x3zZ-nIP4mQ Minimal install, part 2https://youtu.be/22VgIrxkaI0 This is based on the GenPi64…
This post accompanies the following YouTube video: In preparation for installing Linux Gentoo on a Raspberry Pi 5 it was necessary to rebuild the boot partition and prepare related files…
There is a video on YouTube that accompanies this blog post and encourage watching it if any of the points are not completely clear. From time to time you may…
Recently I have been working with more and more Raspberry Pi single board computers and as a person who likes the Linux Gentoo distribution I got the urge to make…
This took a while to get back to but I actually just now bricked my Sheeva64 (corrupted U-Boot) so I could repeat this procedure and make sure everything works correctly.…
In this post I am going to take a look at rebuilding the Sheeva64’s kernel. The Sheeva64 is a 64-bit ARM based single board computer based on a Marvell Armada…
Time to take a look inside the new Sheeva64 and see what has changed from the original SheevaPlug. There is an introduction post located at https://www.drassal.net/wp/index.php/2019/09/24/sheeva64-by-globalscale-technologies-first-thoughts/ with some initial testing…
I recently put in an order for the new Sheeva64 from GlobalScale last Monday, and received it on Friday. After using the SheevaPlug and DreamPlug by the same company I…
I am posting these notes on my blog hoping it is useful to someone in the future… and saves someone the 3 days it took me to come to these…
Allan